Welding fittings "SA" | Copper
Our SA series contains copper weld elbows according to DIN 2607, torispherical heads for the pre-welding according to DIN 28011 and angle flanged wheels for pre-welding.
Maximum permissible operating pressures for copper pipes with SANHA® fittings for welding according to EN 1254-1 |
|||
|---|---|---|---|
| Operating temperature | Outer pipe diameter | ||
| 6...28 mm | 35...54 mm | 64...108 mm | |
| +30 °C | 45 bar | 25 bar | 16 bar |
| +65 °C | 25 bar | 16 bar | 16 bar |
| +110 °C | 16 bar | 10 bar | 10 bar |
Please contact us at uk@sanha.com if you have any questions for applications or conditions outside the ones shown above.
Features
With bigger pipe dimensions, welding can sometimes be more economical than hard soldering since heat is applied specifically to the area of the weld seam for a reliable connection. With hard soldering, the whole fitting has to be heated instead. This can be a lengthy and time-consuming process as heat is rapidly dissipated and consequently more gas will be consumed. Additionally, capillary solder fittings are not available for dimensions exceeding 108 mm outside diameter.
SANHA offers the following range of fittings for welding made of copper:
- Copper weld elbows, catalogue number 3k, dimensions: 35 x 1.5 mm up to 267 x 3 mm
- Torispherical heads for pre-welding according, catalogue number KB, dimensions: 35 x 1.5 mm up to 267 x 3 mm
- Angle flanged wheels for pre-welding, catalogue number WBS V, dimensions: 15 x 1.5 mm up to 267 x 3 mm
Areas of application
More applications on demand.