SANHA®-Therm (series 24000) | Carbon steel
System description
The SANHA®-Therm piping system consists of tried and trusted SANHA®-Therm press fittings from carbon steel (c-steel) with a black sealing ring from EPDM (ethylene propylene dien rubber monomere) and SANHA®-Therm carbon steel pipes according to EN 10305-3.
The carefully manufactured installation systen and its components offer an economically attractive solution for closed installations such as heating or cooling. At the same time, SANHA®-Therm ist especially well suited for pressurised air and fire extinguishing systems according to EN 10346 (DZ version). Yet another variant offers hot-dip galvanised system pipes which are characterised by being easy to bend. Our C-steel system is furthermore available as a LABS*-/silicone free version (series 27000).
Carbon steel pipes need special treatment concerning corrosion and can therefore only be used when all relevant general norms and regulations arefollowed.
SANHA®-Therm press fittings are marked with a red dot on the outside.
*LABS = paint wetting disruptive substances
Products
Operating conditions for SANHA®-Therm system press fittings from carbon steel |
|
|---|---|
| Outer pipe diameter | Operating pressure |
| Water and aqueous solution | |
| d ≤ 108 mm | 16 bar |
| Technical gases (non toxic, non flammable) | |
| d ≤ 108 mm | 16 bar |
| Operating temperature SANHA®-Therm press fittings with black EPDM sealing ring |
-30 °C - +120 °C |
| Type of thread: Pipe thread: R/Rp thread according to EN 10226, Fastening thread: G thread according to ISO 228 |
|
Features
combipress =
+ tool compatibility: pressable with press jaws and slings with original SA, V and M contour up to and including 54 mm
+ Leak path feature (certified forced leakage before pressing with EPDM and HNBR sealing rings) in combination with
+ Push & Stay function for safe, reliable installation in every position
Fast installation, no risk of fire
The connection with carbon steel pipes by cold pressing enables a fast, time-saving installation and eliminates the risk of fire during the process. SANHA®-Therm installation systems are therefore ideally suited for renovation work.
Exceptional flexibility
Permanent connection with carbon steel system pipes according to EN 10305-3 and/or EN 10346 (DZ version):
- SANHA®-Therm installation pipes, galvanized on the outside:
- TIG-welded, pressure tight precision steel pipes in unalloyed steel E195 (material no. 1.0034)
- Ideally suited for heating thanks to no galvanization of the inside = no risk of pump pollution
- Condition on delivery +CR1
- SANHA®-Therm installation pipes, DZ version, galvanized on the in- and outside:
- TIG-welded, precision steel pipes with optimized wall thickness from unalloyed steel
- Pipes are made from continuously galvanized steel (Sendzimir process) according to EN 10346
- Higher corrosion resistance due to galvanization on both sides and therefore optimally suited for use in fire extinguishing and sprinkler systems
- Material E 195 (Z275 MBO) with the material no. 1.0034 according to EN 10305-3
- Condition on delivery +CR2
- Available in the dimensions 22 - 108 mm (sprinkler portfolio)
- hot-dip galvanised SANHA®-Therm installation pipes:
- Hot-dip galvanised unalloyed steel with optimized wall thickness
- Material E195, material no. 1.0034 according to EN 10305-3
- Optimized wall thickness allows easy deforming
- invisible welding seam
- Superior corrosion resistance due to galvanization of one or both sides (depending on version)
- All dimensions 12 - 108 mm including 67 mm
- Safe connection
- Thread compliant with EN 10226 and/or ISO7/1 type R and Rp
Areas of application
More applications on demand.
