Rohrleitungen von SANHA® finden in der Industrie Anwendung

Fixed water extinguishing systems

In the event of a fire, not only human lives but also often high values are at stake. The proper functioning of the respective water extinguishing system is therefore of utmost importance. SANHA® press systems are ideally suited for the connection of fixed water extinguishing systems for many reasons.

System pipes and press fittings from the extensive SANHA® product range allow individual adaptation. Depending on the respective requirements and regulations, the certified product lines NiroSan®, SANHA®-Press | PURAPRESS® and SANHA®-Therm are available.

Stainless steel

NiroSan® system press fittings with black EPDM sealing
NiroSan® Industry system press fittings with red special elastomer sealing
NiroSan® stainless steel system pipes made of Cr-Ni-Mo steel, material no. 1.4404 according to DIN EN 10088

Copper and copper alloys

SANHA®-Press | PURAPRESS® system press fittings made of copper, Cu-DHP, CW024A (fittings) and lead-free silicon bronze CW 724 R (threaded parts, castings) with black EPDM gasket

Carbon steel

SANHA®-Therm system press fittings made of quality C-steel, material no. 1.0034 (E 195) to DIN EN 10305 with black EPDM sealing
SANHA®-Therm DZ system pipes made of unalloyed quality steel, material no. 1.0034 (E 195) to DIN EN 10305, sendzimir galvanised inside and out

SANHA® solutions for stationary water extinguishing systems (PDF)

Fire hydrant systems
DIN 14462
Wet systems	NiroSan^®-System 9000 & 9700
	SANHA^®-Press \| PURAPRESS^®
	SANHA^®-Therm System 24000 & DZ
Dry systems	NiroSan^® Industry 18000
Wet-Dry Systems	NiroSan^® Industry 18000

Approved battery-powered SANHA® Novopress pressing tools

ACO203 BT | ACO203XL BT | ACO403 BT (nur für d = 76,1 ≥ 108 mm)

Pressing jaws and straps for ACO203 / ACO203XL

SANHA®-Therm

PB2-SA (d = 22 mm)
PSL-HP (2) (d = 28 – 54 mm)
PSL-HP (4) (d = 76,1 – 108 mm)

NiroSan® | NiroSan® Industry

PB2-SA (d = 22 – 35 mm)
PSL-SA (d = 42 – 54 mm)
PSL-HP (4) (d = 76,1 – 108 mm)

Request your personalised terms and conditions today: technik@sanha.com!

Due to regulatory requirements, the combipress® function – which is unique in the industry – does not apply to applications such as fire-extinguishing systems and sprinklers. The systems must only be pressed using approved Novopress tools. Please refer to the Novopress installation and operating instructions or contact Novopress GmbH Pressen und Presswerkzeuge & Co. KG, Scharnhorststraße 1, 41460 Neuss, Germany, +49 (0) 2131-288 0