since 1964
Go to homepage
Go to homepage SANHA Premium Quality Seal
SANHA Evocadis Silver Partner

3fit®-Press (series 25000 Pb-free) | Plastic

Products
Certificates
Show cases

Want to know more about our plastic fittings & multi-layer pipes?

Our 3fit®-Press system press fittings are made of a special lead-free copper alloy called silicon bronze (or CuSi in short). This lead-free material makes them optimally suited for use in a system with MultiFit®-Flex and MultiFit®-PEX multi-layer plastic pipes in any drinking water system. The fittings are a WRAS approved product.

What is more: 3fit®-Press fittings are also certified by all relevant international institutions such as DVGW, CSBT or KIWA. Of course, their use is not limited to drinking water. Please find out more about all possible applications further down below. 

Products

Filter products

34 Products
MultiFit-Flex pipe, furled
23000
MultiFit-Flex pipe, furled
View Product
3fit-Push Male elbow 90°
23092G
3fit-Push Male elbow 90°
View Product
3fit-Push Elbow 90° F/F
23090
3fit-Push Elbow 90° F/F
View Product
MultiFit-Flex ISO (9mm) pipe, furled
23300
MultiFit-Flex ISO (9mm) pipe, furled
View Product
MultiFit-Flex protect pipe , furled, red
23200R
MultiFit-Flex protect pipe , furled, red
View Product
3fit-Push Tee
23130
3fit-Push Tee
View Product
3fit-Push Adaptor from metal
23245
3fit-Push Adaptor from metal
View Product
3fit-Push Radiator unions, corn. f.
234APV
3fit-Push Radiator unions, corn. f.
View Product
Insulation plate for wall plates
8981
Insulation plate for wall plates
View Product
MultiFit-Flex ISO (13mm) pipe, furled
23300.13
MultiFit-Flex ISO (13mm) pipe, furled
View Product
3fit-Push Female elbow 90°
23090G
3fit-Push Female elbow 90°
View Product
PURAFIT Extension f. wall bushing
3514
PURAFIT Extension f. wall bushing
View Product
3fit-Push Male adaptor
23243G
3fit-Push Male adaptor
View Product
MultiFit-PE-RT pipe for underfloor heating,furled
23500
MultiFit-PE-RT pipe for underfloor heating,furled
View Product
MultiFit-Pex pipe, PE-Xc, furled
23400
MultiFit-Pex pipe, PE-Xc, furled
View Product
3fit-Push Tee, female
23130G
3fit-Push Tee, female
View Product
3fit-Push Union adaptor
23359G
3fit-Push Union adaptor
View Product
3fit-Push Female adaptor
23270G
3fit-Push Female adaptor
View Product
MultiFit-PE-RT pipe for underfloor heating,furled
23500KB
MultiFit-PE-RT pipe for underfloor heating,furled
View Product
3fit-Push Ceiling elbow female
23473G
3fit-Push Ceiling elbow female
View Product
3fit-Push Coupling
23270
3fit-Push Coupling
View Product
MultiFit-Flex pipe, 5 m rods
23100
MultiFit-Flex pipe, 5 m rods
View Product
3fit-Push Radiator unions, pass. f.
235APV
3fit-Push Radiator unions, pass. f.
View Product
3fit-Push End cap
23301
3fit-Push End cap
View Product

Operating conditions for 3fit®-Press with MultiFit® pipes d ≤ 63 mm
Water and aqueous solutions
Operating temperature Operating pressure
+ 25 °C 16 bar
+ 50 °C 13 bar
+70 °C 10 bar
Operating temperature with black EPDM sealing ring -30 °C - +70 °C
Type of thread: Pipe thread: R/Rp thread according to EN 10226,
Fastening thread: G thread according to EN 228

 

Features

Did you know about our Tool compatibility?

3fit®-Press fittings can be pressed with all jaws and slings with an original TH, B, F, H and U contour up to and including 63 mm
 

So you want an easy installation?

The Push & Stay function allows you to do just that. Without help, in tight spaces and with two hands instead of three - for a safe, reliable installation in every position
 

Unique lead-free alloy

Our specially developed completely lead-free material silicon bronze CuSi helps to fulfill the strict Drinking Water Directive (DWD). Installers are always safe from any legal claim should the lead concentration exceed the tolerances set forth in the DWD
 

Greater safety

These SANHA® fittings have two sealing rings for additional safety!
 

Fast installation, no risk of fire

The connection with multi-layer pipes by cold pressing enables a fast, time-saving installation and eliminates the risk of fire during the process. 3fit®-Press installation systems are therefore ideally suited for renovation work
 

Want more flexibility? Here's what these pipes can do:

  • MultiFit® pipes are easy to bend and to install
  • They are absolutely safe to use, as certified by WRAS and many others
  • They are optimised for the distribution of water on the respective floors
  • There are many different pipes with different layers, insulation and other features available
  • The same goes for the fittings, which help you realise any installation you can imagine
  • We produce all dimensions from 16 to 63 mm
  • Our fittings can be combined with all these pipes for a safe, permanent connection:
    • MultiFit®-Flex multi-layer composite pipe from PE-RT/Al/PE-RT with hygienic inner layer, hermetically sealed aluminium layer and robust outer casing. Higher temperature stability
    • MultiFit®-PEX multi-layer composite pipe from PE-Xc 16 and 20 mm, oxygen-impermeable 5-layer pipes with a special plastic oxygen-barrier EVOH (not for drinking water); available with or without velcro plates for easy installation
    • MultiFit®-PE-RT multi-layer pipes 16 mm, 400 m coil, oxygen-impermeable 5-layer pipes with a special plastic oxygen-barrier EVOH (not for drinking water), with or without velcro. Ideally suited for heating up to 6 bar. Not for drinking water. Also available as 200 m coils
    • Isolated MultiFit®-Flex ISO multi-layer pipes PE-RT/Al/PE-RT with hygienic inner jacket, hermetically sealed aluminium layer and robust outer casing. All pipes are available in dimensions 16 - 32 mm and with an isolation thickness of 9 or 13 mm

Still not convinced?

Then why don't you call our technical support at 01628 819245 or mail us your questions to webuk@sanha.com?
 

 

Areas of application

Drinking water 
Heating
Rainwater
Closed cooling water systems

More applications on demand.

*does not apply to MultiFit®-PEX multilayer composite pipes

This website uses cookies to ensure the best experience possible. More information...