3 in one - combipress!
3 important advantages
The term “combipress” summarises three important advantages of using SANHA, all designed to make installations simpler.
- Tool compatibility: This means that up to 54 mm all original press profiles SA, V or M can be used for metal systems. For plastic, TH, B, F, H and U can be used for our new range. The benefit here is obvious - you can use your existing tooling for our products, and be safe in the knowledge that the connection will work irrespective of the tool used. Please see our installation guide for further details.
- Push and Stay: This means that during assembly of the connection, the friction between the fitting and the pipe will hold it in place, prior to the press taking place. This is especially important when making connections over-head, which would be difficult to hold in place. Remember, as a precaution, to always mark the insertion depth on the pipe. With Push & Stay, you hardly ever need two people to hold a pipe in place!
- Leak path protected: This is a practical function which enables you to detect simply if connections have been left un-pressed. These will be detected either by a reduction in pressure under test, or a visible drip of water from the fitting. Therefore you can be assured that any incomplete joins will be detected prior to commissioning.