The installation system consists of high-grade NiroSan® press fittings with a an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312.
The installation system consists of high-quality NiroSan® press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312.
Installationssystemet NiroSan®-Industry består av högkvalitativa NiroSan®-Industry presskopplingar med formgjuten packning av FKM (per/flor-elastomer) och NiroSan® rostfria rör enligt EN 10312.
The installation system consists of high-quality NiroSan® SF press fittings with red moulded sealing rings made of FKM (fluoro- and perfluoro elastomers) and NiroSan® stainless steel system pipes according to EN 10312. They are specially made for all applications that require silicone free components. Silicone-free moulded sealing rings are ideally suited to applications such as varnishing and painting industries.
Das Rohrleitungssystem NiroTherm® besteht aus hochwertigen NiroTherm®-Pressfittings mit einer schwarzen Formteildichtung aus EPDM (Ethylen-Propylen-Dien-Kautschuk) und NiroTherm®-Edelstahlrohren nach DIN EN 10312.
The installation system consists of high-quality NiroTherm® Industry press fittings with a red sealing ring made from FKM (Fluoro carbon) and NiroTherm® stainless steel system pipes according to EN 10312.
System press fittings from copper for copper pipes according to EN 1057 for drinking water and heating installations.
System press fittings from copper and copper alloys for copper pipes according to EN 1057 for flammable gases and interior gas piping with yellow sealing rings made from HNBR (hydrated nitrile butadiene rubber).
System press fittings from copper and copper alloys for copper pipes according to EN 1057 [insert additional UK norm] for solar and high-temperature applications for compressed air. SANHA®-Press Solar system fittings have red moulded sealing rings made from FKM (fluoro and perfluoro elastomers) for temperatures of up to 200 °C.
SANHA®-Press White system fittings allow for pleasant visible heating and drinking water installations and provide the same features as the SANHA®-Press family.
System press fittings from copper and copper alloys for copper pipes with a black moulded EPDM (=ethylene propylene dien rubber) sealing ring for brilliant chrome-plated copper pipes according to EN 1057.
PURAPRESS® are unique modern premium transition press fittings for copper and stainless steel pipes made from completely lead-free silicon bronze CuSi.
Our system press fittings PURAPRESS® have been awarded the highly-coveted Plus X Award for functionality and high quality by a jury of renowned experts.
Das SANHA®-Therm Installationssystem besteht aus bewährten SANHA®-Therm Pressfittings mit einer schwarzen Formteildichtung aus EPDM (Ethylen-Propylen-Dien-Kautschuk) und SANHA®-Therm C-Stahl-Rohren nach DIN EN 10305-3.
SANHA®-Therm Industri installationssystem består av beprövade SANHA®-Therm presskopplingar med en röd gjuten FKM (fluor och perfluor elastomer) tätningsring för applikationer med hög temperatur och SANHA®-Therm kolstål enligt EN 10305-3.
SANHA produces capillary fittings of the series PURAFIT® - just like press fittings PURAPRESS® - from the premium material lead-free silicon bronze CuSi. This copper alloy is optimally adapted for the use in drinking water systems as it fulfills the strict legal requirements of the Drinking Water Directive.
The SANHA stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can thus be used not only in residential, but also in industrial, commercial and public buildings.
SANHA wall heating modules are a completely new, space-saving system for room heating and cooling. The system is characterized by the exceptionally high living comfort it provides, the ease of installation, very high energy efficiency compared to conventional heating systems as well as its positive impact on our health.
SANHA wall heating modules can be installed nearly everywhere, even in roof slopes.
System press fittings made of lead-free silicon bronze CuSi and PPSU for use in a system with MultiFit®-Flex and MultiFit®-PEX multi-layer plastic pipes by SANHA according to [DVGW W 542 (for drinking water and heating installations) - insert UK norm] as well as copper pipes.
Practical system push fittings with safe and innovative lock function from copper alloys for use in a system with SANHA MultiFit®-Flex and MultiFit®-PEX multi layer plastic tubes for hygienic drinking water and reliable heating installations.
Due to their sophisticated construction, SANHA system push fittings offer an especially safe and durable connection and are just as tight as press fittings. The push connection is easy to make and has the distinct advantage that no tools are required. In this way, using 3fit®-Push fittings incurs no cost for buying, repairing or maintenance of press machines.
3fit®-Push system fittings are ideally suited in narrow spaces where it might be difficult to press fittings with jaws or slings such as during the renovation of buildings.
The SANHA series 4000 and 5000 "SA" consist of tried and trusted solder and transition fittings for copper pipes according to EN 1057 and EN 13348 for hard and soft soldering.
The SANHA series 4000 and 5000 „SA“ consist of solder and transition fittings for copper pipes according to EN 1057 and EN 13348 for hard and soft soldering.
Our SA series contains copper weld elbows according to [DIN 2607 - insert UK norm], torispherical heads for the pre-welding according to [DIN 28011 - insert UK norm here] and angle flaned wheels for pre-welding.
SANHA threaded fittings are manufactured from malleable cast iron EN-GJMB-350-10 according to EN 1562, the design symbol "A" and fitted with connection threads according to EN 10226 and ISO 7/1. Thanks to their high resistance to vibration and impact, these high-grade and extremely stable mouled parts in malleable cast iron can also be used in the toughest conditions.
The requested page was not found.